TeeJet CenterLine v1.05 - Manual (Page 33)

CenterLine
Software Version 1.05
Tools
The Tools menu is intended to provide some basic system diagnostics. Tools contains two diag-
nostic tools: Receiver and Lightbar (See Table 12).
To access Tools from the Setup menu, scroll until the text window displays <TOOLS>, and press
Enter. <RECEIVER> should be displayed in the text window. Use Up or Down to scroll through
the Tools menu.
Figure 29: The Tools Menu Flow
Menu Item Description
Receiver Checks the status of a connected GPS receiver.
Lightbar Tests the functionality of the CenterLine Lightbar LEDs and
text window.
Table 12: Tools Menu Items
Receiver
The Receiver diagnostic test queries the attached GPS receiver and returns its current configura-
tion and status. This information is displayed in the text window on the lightbar.
To start the Receiver check, go to the Tools menu, scroll until <RECEIVER> is displayed in the text
window, and press Enter. The lightbar displays the diagnostic messages shown in Table 13.
CenterLine
Tools
27