TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 114)

4-22 Chapter 4 - Real-time Operation
Real-time Guidance Operation
Fieldware-SA for the Legacy 6000
Software Version 2.00
Ignore Headland Pattern Example
Step 1: Start Applying Headlands
From the Map page, during real-time operation, make sure that Headland guidance mode is
active. Press the Headland On button and begin applying the first headland pass. During the first
pass, the field boundary can also be mapped (see Mapping a Field Boundary on page 4-35). Apply
as many headland passes as desired. The A and B points can also be marked for Straight-Line
guidance (see The Straight-Line Guidance Pattern on page 4-14). Figure 4-18 shows the vehicle
applying the first headland pass. The Headland On button is shown to the left.
Figure 4-18: Applying the First Headland Pass