TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 157)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 5 - Fieldware FieldPilot 5-19
Fieldware-SA Real-Time Operation
Clearing a Fault
Setup Description
From the real-time Rates page, select Device Manager. When in Device Man-
ager, scroll through the pick list and select Autopilot.
Select the error log soft-key. This displays a description of the fault. The Error
Log soft-key now has a Green X on it (Figure 18).
To clear the fault select the Error Log soft-key again. The fault information
should be removed from the Device Manager page.
Return to real-time operation by pressing the Back Arrow soft-key, until the Rates page
appears.
Table 5-5: Fault Clearing Steps
Figure 5-18: Clear Current Fault