TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 64)

3-8 Chapter 3 - Real-time Setup
Setting up a Report
Fieldware-SA for the Legacy 6000
Software Version 2.00
Setting up a Report
Weather, soil, and field related data, used to build an application report, can be entered in Report
Setup. Application reports are generated in the Fieldware Map Manager desktop program.
Report Setup is accessed from the ARM Launcher page (Figure 3-6). Select the Report Setup tab
and move to the main Report Setup page (Figure 3-7). Table 3-3 describes each Report Setup
menu item.
It is not necessary to fill out any Report Setup information in order to start applying products. The
Report Setup Information should be filled out if this data is to be written to the header of the record
file (.RCD).
Figure 3-6: ARM Launcher