Lightbar setup, Lightbar setup -15 – TeeJet Swath XL User Manual
Page 135
Swath XL
Software Version 3.00
4-15
Chapter 4 - Waypoint Navigation
Lightbar Setup
Lightbar Setup
The Lightbar Setup process is accessed from the Nav 2 Point Setup Menu. There are five lightbar menu items associ-
ated with the Lightbar Setup process: Use Lightbar, LED Brightness, Alarm, Alarm Range, and Display Message.
To access the Lightbar menu page, highlight the Setup menu item in the Nav 2 Point Main menu page and press
.
This takes you to the Setup menu page, see Figure 4 -14. Within the Setup Menu select the Lightbar menu item using
the arrow keys
. Press
to enter the Lightbar menu page. Once in the Lightbar menu page, you can change
any of the Lightbar menu items by highlighting the desired menu item and pressing
.
Figure 4-14: Accessing Lightbar Setup from the Main Menu