TeeJet Swath XL - Manual (Page 146)

Chapter 4 - Waypoint Navigation 4-26
Nav 2 Point Real-Time Scenarios
Swath XL
Software Version 3.00
Nav 2 Point Real-Time Scenarios
The following sub-sections will describe various Nav 2 Point real-time process scenarios.
Mapping a Field Boundary
In this example the operator wants to map a field boundary. The Data Setup Boundary menu item is set to New, see
Figure 4 -25. The operator has also decided not to show any existing points or grid data. This is accomplished by set-
ting the Point/Grid File menu item to Off. This setting could be set to New or Show and the operator could still create
a new field boundary.
The field boundary to be mapped is bounded by a fence and therefore the user must set an antenna offset to place the
antenna position off to one side of the vehicle, Figure 4 -26.
Figure 4-25: Data Setup Menu Page Configured to Map a New Field Boundary