TeeJet Swath XL - Manual (Page 62)

Chapter 3 - Real-Time Guidance 3-14
Lightbar Setup
Swath XL
Software Version 3.00
Lightbar Setup
The Lightbar Setup menu is accessed from the Main Menu Launcher Setup item. There are nine lightbar menu items
associated with the Lightbar Setup process: Drive Sensitivity, Display Mode, Alarm, Hazard Range, Parallel Message
1, Parallel Message 2, Parallel Message 3, Curved Message, and LED Brightness, see Figure 3-17.
To access the Lightbar menu page, highlight the Setup menu item in the Main menu page and press . This takes
you to the Setup Menu, see Figure 3-16. Within the Setup Menu highlight the Lightbar menu item using then
press . You can change any of the Lightbar menu items by highlighting the desired menu item and pressing .
Figure 3-16: Accessing the Lightbar Menu Page