TeeJet Swath XL - Manual (Page 45)

Swath XL
Software Version 3.00
2-25 Chapter 2 - Software Overview
Swath XL Tools
Lightbar Test
The Lightbar Test diagnostic allows the users to determine if the Smartpad is communicating with the lightbar. The
Lightbar Test diagnostic can also be used to determine if any of the guidance LEDs or LEDs in the text display are not
working properly.
To run the lightbar test program, highlight the Lightbar Test menu item using the keys. Once highlighted
press . This automatically starts the lightbar test program. The test consists of the guidance LEDs illuminating by
color; first Green, then Yellow, and finally Red. Once the guidance LED test cycle is complete, the text display illu-
minates in a series of blocks. This cycles a few times. The test is completed when the text display reads End.
Figure 2-26: Lightbar Test