TeeJet LH INTELLITRAM 500 - Manual (Page 20)

I NFO & D ATA / DELETE LH ”I NTELLITRAM ” 500 O PERATORS MANUAL
20 LH A GRO
THE COUNTERS IN A TASK
New counter
Delete counter
Kg 0
Time 0:00:00
Ha 0.00
Metre 0
Trip counter
1/10
The screen to the left is displayed
when the “Data/delete” menu is
selected. A description of each
individual counter follows:
Kg:
The total amount, in kg, since the task was started or since the counter was reset.
Time:
The total time since the task was started or since the counter was reset. How time
is measured is dependant on the STOPWATCH encodement (see page 18).
If “None” has been selected time will be measured from when the task is started
until the task is stopped or the counter is reset.
If “Implement” has been selected time will be measured when the seed drill is
working, i.e. only when sowing.
Ha:
The total area, in ha, since the task was started or since the counter was reset.
The measured area is the effective area, i.e. only the area that has been sown.
Metre:
The distance driven (effective distance) in metres since the task was started or
since the counter was reset.
START/CONTINUING A TASK
When selecting the ”Data/delete” menu the previously opened task is “opened
Counter no. 1
Counter no. 2
Counter no. 3
Counter no. 4
Counter no. 5
Counter no. 6
Trip counter
To start or continue a task highlight
“New counter” and press the ENTER
key. Task 1 – 10 can now be selected
by using the ARROW UP and
ARROW DOWN keys to mark the
required task number and then press
the ENTER key.
To return to the main operating screen
press the MENU key.