ThermoWorks P770 PRINTING DATALOGGER THERMOMETER - Manual (Page 13)

1.5 Recalling the memory data
(HOLD MAX MIN AVE)
After pushing first time the key [HOLD MAX MIN
AVE] the actual value will be hold on the top display
line (big display). Pushing again the key [HOLD MAX
MIN AVE], the saved maximum-, minimum and aver-
age value will be displayed in the bottom display line
(small display). Note for 2-channel instruments: First
the MAX-MIN-AVE-values of channel 1 will be dis-
played – afterwards the values of the channel 2 will
be displayed. Is there only one probe on a 2-channel
instrument we suggest to deactivate the channel
without probe (menu Chnl).
Note:
During the recall of the memory data the extremes
(MAX MIN) and the average value (AVE) will not be
calculated or carried on.
Clearing the memory (MAX MIN AVE)
Press [CLEAR] key once to erase the stored maxi-
mum, minimum and average from memory. On the
display appears Clr. – After erasing the memory the
instrument automatically switches back to measur-
ing mode indicating the actual measured value again.
1.6 Measuring rate (FAST-mode)
Press [FAST/ ᮢ ]key once to change the measuring
rate. Now the measuring rate is app. 4 measure-
ments per second. Press [FAST/
ᮢ ] key again and the
instrument is back in the standard mode (1 measure-
ment per second).
Note:
In the fast mode the battery consumption is three
times higher than in the standard mode.
1.7 AUTO-OFF-function
dAoF = Disable Auto-off
EAoF = Enable Auto-off
Press [ESC/AUTO-OFF] key once. On the display
appears EAoF. Now the instrument switches off
automatically after app. 30 minutes. Press
[ESC/AUTO-OFF] key again. On the display appears
dAoF. Now the Auto-Off-function is deactivated.
1.8 Special-functions
(Ohm/Micro volt/Volt/Hertz-display)
If you want to get the shown value displayed accord-
ing to the basic units you will have to push, when
you switch on, the keys FAST and ON/OFF at the
same time for approximately 3 seconds till the next
basic unit appears:
Important!
Important!
13
DE P700 Anleitung engl. 08/10 27.08.2010 14:02 Uhr Seite 13