ThermoWorks P770 PRINTING DATALOGGER THERMOMETER User Manual
Page 6
To change the measuring unit push [ENTER/MENUE].
Use the up and down keys [
ᮡᮢ
] to select Unit.
Push again [ENTER/MENUE]. On the left corner of
the display appears a small 1, which indicates the
selected channel. For changing the channel use the
up and down keys [
ᮡᮢ
] Push [ENTER/MENUE] to
confirm. On the right corner of the display appears
°C or °F, or %rH, td or gm
3
(depending on the selec-
ted probe). Use the up and down keys [
ᮡᮢ
] again to
adjust the requested measuring unit and push
[ENTER/MENUE] to confirm. Push [ESC] to be back
in the measuring mode.
1.4.2 Probe selection / [Prob]
Push [ENTER/MENUE] to change a probe. Use the
up and down keys [
ᮡᮢ
] to select Prob. Push
[ENTER/MENUE] to confirm.
On the left corner of the display appears a small 1,
which indicates the selected channel. For changing
the channel use the up and down keys [
ᮡᮢ
]. Push
again [ENTER/MENUE] to confirm. On the right cor-
ner of the display appears the active probe. Use the
up and down keys [
ᮡᮢ
] to change the probe. Push
[ENTER/MENUE] to confirm the requested probe.
Push [ESC] to be back in the measuring mode.
Measurement Probe selection LC-Display
Suitable for
(Prob)
these types
of measuring
instruments:
Temperature
Pt100 (RTD)
P700/P705/
P750/P755/P770
P755-LOG/P770-LOG
Temperature
Fe-CuNi Typ J
for all P700-
instruments
Temperature
NiCr-Ni Typ K
for all P700-
instruments
Temperature
Fe-CuNi Typ L
for all P700-
instruments
Temperature
NiCrSi-NiSi Typ N
for all P700-
instruments
Temperature
Pt13Rh-Pt Typ R
P700/P705/
P750/P755/P770
P755-LOG/P770-LOG
Temperature
Pt10Rh-Pt Typ S
P700/P705/
P750/P755/P770
P755-LOG/P770-LOG
Unit
ᮣ
ᮣ
ᮤ
ᮤ
MENUE
Prob
Lin2
CAL
PrEn Chnl ArEA
Lo6
Unit
ᮣ
ᮣ
ᮤ
ᮤ
MENUE
Prob
Lin2
CAL
PrEn Chnl ArEA
Lo6
6
DE P700 Anleitung engl. 08/10 27.08.2010 14:02 Uhr Seite 6