Tii FDH1 - Manual (Page 4)

4 Tii Network Technologies Inc. 2012
Fiber Routing Guides
3. Warranty
3.1. See TII Warranty. If this unit fails during the warranty period, the factory should be requested to
authorize return. Return the unit prepaid. Units that fail due to normal wear or abuse should be
discarded.
4. All cabinet versions.
4.1. Modular LGX bulkhead adapters - for interconnection between feeder and distribution fibers.
4.2. Slack Storage - The FDH1 is designed to allow for storage of pre-terminated 12F SST drop cable inside
the unit with tie-downs to secure the cable.
4.3. Output Fiber Management – Provides a method of routing fibers to the LGX adapter plates.
4.4. Splitter Compartment – Provides a location to mount one or two 1x32 splitters modules. Secured via
Velcro straps.
4.5. Interior Grounding Lug – Provides a bonding and grounding point for all dielectric fiber cables.
4.6. Entry Ports – Equipped with Top and Bottom entry ports to allow for use of input/output cable
configurations.
4.7. Removable Outer Door – To allow for easy installation in confined spaces.
FIGURE 1. Basic Layout.
Modular LGX Adapter plates (6,8 or 12)
Padlock Hasp
Slam-latch
Mounting Ears