Vermont Casting IRHEDV32 - Manual (Page 18)

10003929
Fit Decorative Frame to the fireplace and fasten (Fig. 25).
Plastic on the trim must be removed
before mounting onto the fireplace.
Glass must be tightly pressed against the
front of the frame in order to prevent
screws from damaging glass edges.
Fig. 25
AS SHOWN FROM FRONT
SCREWS
FRAME MOUNTING
GENERAL INFORMATION
The Decorative Front Frame should be installed last
after all other work, such as gas connections, venting,
etc., has been completed and thoroughly checked and
tested for operation, leaks and proper installations
requirements.
18