Vermont Casting IRHEDV32 - Manual (Page 22)

10003929
A4) HEBTKP, HESBTKP, HECBTK, HECBTKMB & HEBTA TRIMS
HECBTK - Cast bay window and grills in classic black trim kit
HECBKMB - Cast bay window and grills in midnight black porcelain enamel trim kit
HESBTKP - Steel bay window with polished brass and cast grills in classic black trim kit
HEBTKP - Steel bay window and bay louvres with polished brass trim kit
Install the bay window after all other installation work has been completed, thoroughly checked, and tested for operation, leaks
and proper installation requirements.
1) Reposition controls.
a) Remove the Fan Speed Control Box (Fig. 33)
b) Attach the Fan Speed Control Box to the Bracket (Fig. 34) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c)
Install the Control Knobs Extensions onto the appropriate Control Valve Knobs (Fig. 35)
On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor
button may vary slightly from those shown in Fig. 35. The Honeywell extension pieces are visually
different in design and are not interchangeable with the RN/RP knobs shown in Fig. 35.
2) Install the hanging brackets, as per Fig. 36.
3) Install the two ceramic pieces inside the bay window, as per Fig.32.
4) Install the bay window by hanging it onto the lower tabs of the hanging brackets, as per Fig. 37.
5) Install the upper grill by engaging the obround holes with the upper tabs of the hanging brackets, as per Fig. 38.
6) Install brass trim to the steel frame as per Fig. 39 (Only for HESBTKP trim)
HEBTKP
HESBTKP HECBTK &
HECBTKMB
Fig. 30 Fig. 31 Fig. 32
DO NOT REMOVE EXISTING GLASS WITH FRAME
22
HECBTKP, HECBTKMB and HESBTKP Trim Assembly