Compaq S4 100 - Manual (Page 10)

6
CAUTION: Make sure the surface is flat. Operating your
scanner on an uneven surface can damage the internal
components.
Connecting the Hardware Interface Cables
If your computer has a USB port, follow the instructions in the
Connecting the USB Cable section to connect the scanner to your
computer.
Connecting the USB Cable
1. Locate the USB cable that is provided. Plug one end of this
cable firmly into the USB port on the back of the computer.
For Compaq Scanner
2. Plug the other end of this cable into the port located on the
back panel of the scanner.
Connecting the Power Adapter
1. Plug the scanner’s power adapter into an electrical outlet.
2. Insert the other end of this cable into the power adapter
receptacle on the rear panel of the scanner. The power indicator
on the front panel of the scanner should now be illuminated.
USB Connector Port
USB Connector Port