Compaq S4 100 - Manual (Page 51)

Compaq S 4 100 Owner’s Guide
47
To configure the values for the FAX function:
1. If the FAX icon is not selected (enclosed in a red box), click the
FAX icon.
2. Select the FAX driver to send the scanned image to, by clicking
on the arrow to the right of the FAX Destination field.
3. Select the type of image you are scanning by clicking on the
arrow to the right of the Document Type field and choosing one
of the available document types from the drop-down menu.
4. Select the desired resolution by clicking on the arrow to the right
of the Resolution field and choosing one of resolution presets
from the drop-down menu.
5. Select a scanning intensity level (brightness) by clicking on the
arrow to the right of the Brightness field and choosing the
desired brightness level from the drop-down menu.
6. Select the file size for the scanned image by clicking on the
arrow to the right of the Scan Area field and choosing the desired
dimensions from the drop-down menu.
7. Click the OK button to save the Custom FAX push button
configuration settings. The Custom setting is now configured to
scan and send the scanned image to the selected e-mail