Cisco 7931G - Manual (Page 28)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-28
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Power Save Configuration Menu
The Power Save Configuration menu displays the settings that control when the
phone screen backlight turns off to conserve power.
Table 4-9 describes the
options on this menu.
For detailed information about configuring these settings, see the “Automatically
Disabling the Cisco Unified IP Phone Backlight” section on page 6-7 .
Enterprise
Advertise G.722 Indicates whether Cisco Unified IP
Phones advertise the G.722 codec to
Cisco Unified Communications
Manager. If enabled (default), and if each
endpoint in the attempted call supports
G.722 in its capabilities set, Cisco
Unified Communications Manager
chooses G.722 for the call.
Note When a phone is registered with
a Cisco Unified Communications
Manager that does not support
this setting, the default is
“Disabled.”
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
Device
Advertise G.722 Allows you to override the Enterprise
Advertise G.722 Codec on a per-phone
basis.
The default is “Use System Default,”
which means that the value configured
for the Enterp G.722 Codec parameter is
used.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone.
Table 4-8 Media Configuration Menu Options (continued)
Option Description To Change