Cisco 7931G - Manual (Page 41)

4-41
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
802.1X Authentication and Status
The 802.1X Authentication and 802.1X Authentication Status menus allow you to
enable 802.1X authentication and monitor its progress. These options are
described in
Table 4-17 and Table 4-18 .
You can access these menus from the Settings menu > Security Configuration
menu by choosing 802.1X Authentication or 802.1X Authentication Status.
For instructions about how to access the Security Configuration menu and its
submenus, see the
“Displaying a Configuration Menu” section on page 4-3 .
CallManager /
TFPT Server IP address of a Cisco Unified
Communications Manager and TFTP
server used by the phone. Also displays a
certificate
icon if a certificate is
installed for this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified Communications Manager
Security Guide.
SRST Router IP address of the trusted SRST router that
is available to the phone, if such a device
has been configured in Cisco Unified
Communications Manager
Administration. Also displays a
certificate
icon if a certificate is
installed for this server.
For more information about these
settings, refer to the “Configuring the
Cisco CTL Client” section in Cisco
Unified Communications Manager
Security Guide.
Table 4-16 Trust List Menu Settings (continued)
Option Description To Change