Cisco 7931G - Manual (Page 30)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-30
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Security Configuration Menu
The Security Configuration menu that you access from the Device Configuration
menu displays settings that relate to security for phone.
Table 4-11 describes the options on the Security Configuration menu.
Table 4-10 Ethernet Configuration Menu Options
Option Description To Change
Forwarding
Delay Indicates whether the internal switch
begins forwarding packets between the
PC port and switched port on the phone
when the phone becomes active.
• When forwarding delay is set to
disabled, the internal switch begins
forwarding packets immediately.
• When forwarding delay is set to
enabled, the internal switch waits 8
seconds before forwarding packets
between the PC port and the switch
port.
Default is disabled.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Span to PC Port Indicates whether the phone forwards
packets transmitted and received on the
network port to the access port.
Enable this option if an application that
requires monitoring of the phone’s traffic
is being run on the access port. These
applications include monitoring and
recording applications (common in call
center environments) and network packet
capture tools that are used for diagnostic
purposes.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.