Vizualogic RoadTrip Elite 8 - Manual (Page 20)

Center Armrest Monitor
19
Ins tallation and Conn ections
Choose the installation way of the screws.
5
Drill cable hole.
After chosen the suitable plastic washer, please
drill a 15mm hole with plastic washer in the U
breach place. (Figure 6)
‧ A Type (Figure 5-1)
Put the mounting plate inside of the console box,
and fix the mounting plate from outside to inside
with 4pcs 4x25 self-tapping screws. same as right
bracket.
‧ B Type (Figure 5-2)
Use 4x25 self-tapping screws and spring
buckle to fix the bracket on the both sides of
the console box.
15mm Cable Hole
(Figure 6)
Fix the transverse axle
After adjusting and confirming the width of
transverse axle, please use the Allen Key to tighten
the 5x12 screws. (Figure 7)
7
6
Assemble the outside cover of the Right/
Left Brackets.
Use 3x8 screws to fix the outside cover of the
right and left bracket arms. (Figure 8)
The above is all installation.
8
(Figure 8)
A Type
B Type
(Figure 7)
Allen Key