Winco DSE7000 Quick Start Guide User Manual
Page 12
DSE Model 7000 Series Quick Start Guide
12
Part No. 057-101 7000 Series Quick Start Guide ISSUE 1 14/04/2009 JR
3.4.2 CAN ERROR MESSAGES
When connected to a suitable CAN engine the 7000 series controller displays alarm status messages from the ECU.
Alarm
ECU Warning
Warning
Press
to access the list of current active Engine DTCs (Diagnostic Trouble Codes).
Engine DTCs
The code interpreted by the module shows on the display as a text message.
Additionally, the manufactures code is shown.
Water Level
Low
Xxx,xxx,xxx
NOTE:- For details on these code meanings, refer to the ECU instructions provided by the engine
manufacturer, or contact the engine manufacturer for further assistance.
NOTE:- For further details on connection to electronic engines please refer to Electronic engines and
DSE wiring. Part No. 057-004
Type of alarm as reported by the ECU
Type of alarm that is triggered in the
DSE module (ie Warning or Shutdown)