Winco ASCO 300 J Design 600 Amp - Manual (Page 19)

CONTROL FEATURES (continued)
5---5
OPTIONAL STRIP HEATER (Accessory 44)
Accessory 44 Strip Heater is designed to keep ambient
temperatures within the Automatic Transfer Switch
enclosure at acceptable levels. This accessory consists
of a mounting bracket with strip heater, thermostat, and
terminal block. A transformer with fuses is included
when the power for the assembly is derived from
voltages above 120 V ac. The 120 V ac customer
powered assembly does not include a transformer. This
optional accessory is available factory installed or in kit
form.
Turn the thermostat’s dial to required setting as shown.
dial
turn counterclockwise
to lower temperature
turn clockwise
to raise temperature
thermostat
Figure 5–4. Thermostat.
AVAILABLE KITS
Controls
Description Accessory Kit
Programmable Engine Exerciser
& Source Availability Contacts
11BG K629830
Serial Communication Module 72A K601110
Strip Heater – Accessory 44
Description Accessory Kit
120 volt
customer supplied voltage
(without transformer)
44A K613127–001
208 – 480 volt
ATS derived voltage
(with transformer)
44G K613127–002
380 volt
ATS derived voltage
(with transformer)
44G K613127
550 – 600 volt
ATS derived voltage
(with transformer)
44G K613127–003