User manual - optima ups 1k-3k (english), Error codes, Alarms on lcd – XMART Optima 3K-HB User Manual
Page 18
USER MANUAL - OPTIMA UPS 1K-3K (ENGLISH)
_________________________________________________________________________________________________________________________________
www.xmart-ups.com
1406-OPTIMA
1K-3K
- 18
10. ERROR CODES
FAILURE / ERROR
CODE
ICON
Bus failure
01
Hi BUS Voltage
02
Low BUS Voltage
03
Bus Unbalanced
04
Short-circuit in BUS
05
Soft-start Inverter Failure
11
Inverter: Hi Voltage
12
Inverter: Low Voltage
13
Inverter output short circuit
14
Battery Very High Voltage
27
Battery Very Low Voltage
28
Over Temperature
41
x
Overload: UPS power output capacity has been exceeded.
43
11. ALARMS ON LCD
ALARM Description
ICON on LCD
Beep Alarm
Low battery
1 / s
Overload: hi power consumption detected at UPS output.
2 / s
Battery disconnected
1 / s
Batteries overcharged
1 / s
Input Cable failure
1 / s
EPO enable
1 / s
FAN failure
1 / s
Over Temperature
1 / s
Battery charger problem
1 / s
Input out of range in bypass mode
1 / s
Battery failure
1 / s
Battery need to be replaced
2 / s
Input frequency unstable for BYPASS mode
1 / s
EOPTIMAM memory error
1 / s
BEEP ALARM
Battery Mode:
1 “Beep” every 4 seconds
Battery Low:
1 “Beep” per second
Output Overload:
2 “Beeps” per second
UPS Failure:
Continuous Beep
By-Pass Mode:
1 Beep every 10 seconds.