Ram Trucks 2015 ProMaster - Owner Manual - Manual (Page 163)

To record the stations that are found, these are sorted in
ascending order of frequency and the first one is stored in
memory position 1, and so on, until positions 1-6 are all
in use. If fewer than 6 stations are found, the unused
channels will be allocated to the 107.9 MHz frequency for
FM and AM 1710 KHz for the AM band. At the end of the
search process, the radio tunes in to the first preset
position and the display will indicate the associated preset
number (1) and the station frequency for three seconds.
The display will then return to the previous view.
Setup Menu
You can use the Setup menu to change the various factory
settings to suit your own preferences.
Push MENU to activate the Maximum Volume function.
Repeatedly pushing this button will activate the other
functions in the following sequence: Maximum Volume
(MVOL) Auto Switch (AUTO) Beep (BEEP)
Set Clock Maximum Volume (MVOL). If this
button or the button for adjusting the selected function
is not pushed for five seconds or if the ROTARY knob
is pushed, the display returns to the previous view
and the changes will be saved.
Maximum Volume
This function allows you to set the maximum permissible
volume. Turn the ROTARY knob to set the volume. The
display will show a message in the format ЉMVOL 26Љ
indicating the maximum volume selected. When the
maximum volume selected is the maximum radio vol-
ume, the display will show ЉMVOL OFFЉ.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 161