Phone/bluetooth – Ram Trucks 2015 ProMaster - Owner Manual User Manual

Page 180

Advertising
background image

Loudness — If Equipped
Loudness improves sound quality at lower volumes. To

make your selection, press the “Loudness” button on the

touchscreen, then choose “On” or “Off.” The button will

highlight indicating that the setting has been selected.

Press the back arrow/Done button on the touchscreen

when done.
Auto - On Radio
Press the Auto On Radio button on the touchscreen to set

how the radio behaves when the Ignition is switched to

On. The options are: ON, Off or Recall Last. Press the

back arrow/Done button on the touchscreen when done.
AUX Volume Offset
This feature provides the ability to tune the audio level

for portable devices connected through the AUX input.

To make your selection, press the AUX Volume Match

button on the touchscreen, choose a level from –3 to +3

followed by pressing the back arrow/Done button on the

touchscreen.
Radio Off Delay
Press the Radio Off Delay to keep the radio On for a

preset amount of time after the Ignition is switched Off.

Press the back arrow/Done button on the touchscreen

when done.
Phone/Bluetooth®
After pressing the “Phone/Bluetooth®” button on the

touchscreen the following settings will be available:
Paired Phones
This feature shows which phones are paired to the

Phone/Bluetooth® system. For further information, refer

to the Uconnect® Supplement Manual.

178 UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising