Wheel covers, Jump-starting procedures – Ram Trucks 2015 ProMaster - Owner Manual User Manual

Page 324

Advertising
background image

Wheel Covers

CAUTION!

Use a back-and-forth motion to remove the hub cap.
Do not use a twisting motion when removing the hub
cap, damage to the hub cap finish may occur.

The wheel covers on the vehicle are held in place by the

wheel lug bolts and can be removed after the wheel lug

bolts are taken off.

JUMP-STARTING PROCEDURES
If your vehicle has a discharged battery it can be jump-

started using a set of jumper cables and a battery in

another vehicle or by using a portable battery booster

pack. Jump-starting can be dangerous if done improperly

so please follow the procedures in this section carefully.

NOTE:

When using a portable battery booster pack

follow the manufacturer’s operating instructions and

precautions.

CAUTION!

Do not use a portable battery booster pack or any
other booster source with a system voltage greater
than 12 Volts or damage to the battery, starter motor,
alternator or electrical system may occur.

WARNING!

Do not attempt jump-starting if the battery is frozen.
It could rupture or explode and cause personal injury.

322 WHAT TO DO IN EMERGENCIES

Advertising