D) drive vehicle – Ram Trucks 2015 ProMaster - Owner Manual User Manual

Page 305

Advertising
background image

3. Immediately disconnect the Sealant Hose (6) from the

valve stem, reinstall the cap on the fitting at the end of

the hose, and place the Tire Service Kit in the vehicle

storage location. Quickly proceed to (D) “Drive Ve-

hicle.”

CAUTION!

The metal end fitting from Power Plug (8) may get

hot after use, so it should be handled carefully.

Failure to reinstall the cap on the fitting at the end

of the Sealant Hose (6) can result in sealant con-
tacting your skin, clothing, and the vehicle’s inte-
rior. It can also result in sealant contacting internal
Tire Service Kit components which may cause
permanent damage to the kit.

(D) Drive Vehicle:
Immediately after injecting sealant and inflating the tire,

drive the vehicle 5 miles (8 km) or 10 minutes to ensure

distribution of the Tire Service Kit Sealant within the tire.

Do not exceed 55 mph (90 km/h).

WARNING!

Tire Service Kit is not a permanent flat tire repair.
Have the tire inspected and repaired or replaced after
using Tire Service Kit. Do not exceed 55 mph
(90 km/h) until the tire is repaired or replaced. Failure
to follow this warning can result in injuries that are
serious or fatal to you, your passengers, and others
around you.

6

WHAT TO DO IN EMERGENCIES 303

Advertising