Cisco 1-PORT G.SHDSL 2600 - Manual (Page 11)

1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series Routers
Configuration Examples
11
Cisco IOS Release 12.2(4)XL
session target ATM0/1 pvc 10/100 33
codec aal2-profile ITUT 7 g729abr8
no vad
.
.
.
dial-peer voice 3024 voatm
destination-pattern 3024
called-number 3024
session protocol aal2-trunk
session target ATM0/1 pvc 10/100 54
codec aal2-profile ITUT 7 g729abr8
no vad
!
dial-peer voice 1 pots
destination-pattern 4001
port 1/0:0
!
dial-peer voice 2 pots
destination-pattern 4002
port 1/0:1
.
.
.
dial-peer voice 24 pots
destination-pattern 4024
port 1/0:23
!
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
login
!
no scheduler allocate
end
Configuration in CO Mode Example
The following example shows a G.SHDSL configuration of VoATM over AAL2, operating in central
office (CO) mode, on a Cisco 2600 series router. This router in CO mode can be linked to another router
that is configured to operate in CPE mode.
Router#
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname host2
!
memory-size iomem 10
voice-card 1
!
ip subnet-zero
ip host host2 225.255.255.224
!
no mgcp timer receive-rtcp
call rsvp-sync