Canon L90 - Manual (Page 165)

Troubleshooting
8-2
Clearing Jams
This section describes how to remove
jammed paper. When error messages
appear on the LCD display, see “LCD
Messages,” on p. 8-9. For other troubles,
see Chapter 8, “Troubleshooting,” in the
Reference Guide.
When <CHECK DOCUMENT>, or <PAPER
JAM/OPEN REAR COVER> appears on the
LCD display, remove jammed paper from
the machine first, then from the paper
feeder if necessary. Check the following if
you experience repeated paper jams:
Fan and tap the paper stack on a
flat surface before loading it in the
machine.
Check that the paper you are using
meets the requirements for use. (See
“Paper Requirements,” on p. 2-6.)
Make sure you have removed any
scraps of paper from the inside of the
machine. –
–
–
When removing jammed documents or paper,
take care not to cut your hands on the edges of the
document or paper.
When removing jammed paper or when inspecting
the inside of the machine, do not allow necklaces,
bracelets, or other metal objects to touch the
inside of the machine, as this may result in burns or
electrical shock.
If you tear the paper, remove any torn pieces to
avoid further jams.
If loose toner comes into contact with your skin or
clothing, wash with cold water. Warm water will set
the toner.
Do not force a jammed document or paper out of
the machine. Contact Canon Customer Care Center if
needed.
–
–
–
–