Canon L90 - Manual (Page 173)

Troubleshooting
8-10
Message Description Action
CANNOT REGIST MORE The number of entered
recipients for broadcasting
has already reached the
upper limit (131).
– Send the document
separately.
–
The number of registered
recipients for group dialing
has already reached the
upper limit (50).
– Register a different one-
touch speed dialing key for
group dialing.
–
The number of memory
stored in Polling TX has
already reached the upper
limit (30).
– Wait for the sending to
complete or delete the
unnecessary documents.
–
The number of entered
recipients for Polling RX has
already reached the upper
limit (131).
– Send the document
separately.
–
CANNOT USE FUNCTION Redialing is not available with
[Redial].
This message appears when
<RESTRICT REDIAL> is set
to <ON> in the <ACCESS
TO DEST.> of the <SYSTEM
SETTINGS> menu. Dial the number manually.
CHECK DOCUMENT A document jam may have
occurred in the ADF.
– Remove the jammed
document.
–
The document is longer than
15 3/4" (400 mm).
– Reduce the length of
the document to within
15 3/4" (400 mm), then try
again.
–