Canon L90 - Manual (Page 175)

Troubleshooting
8-12
Message Description Action
LOAD PAPER No paper is loaded in the paper
feeder. Load paper correctly. Then
press [OK] when using the
paper feeder.
LOST IMAGE The machine was turned
off when any documents
were stored in the machines
memory.
Any data stored in the
memory, including received fax
documents, will be deleted if
you disconnect the power cord
of the machine. The error is automatically
released after two seconds,
and the machine automatically
prints out the lost report that
shows the records still existing
in the activity report.
MEMORY FULL The machine is full of jobs. – Print, send, or delete any
documents stored in
memory.
–
Divide the document stack
into a few parts and try
again one by one.
–
Send the document with
low resolution.
–
The number of TX/RX
jobs that can be stored
in memory reached the
maximum.
– The maximum numbers
of jobs that can be stored
in memory are as follows
(Based on the condition that
the other party sends the
fax by FAXPHONE L90 with
ITU-T Standard Chart No.1,
mode); Up to 256 jobs for
sending and receiving. Wait
for the machine to send
any documents in memory.
Also print, send, or delete
any documents stored in
memory.
–