Selecting the component, 1 press input buttons to select the input, Listening to fm/am radio – Sony HT-DDW660 User Manual

Page 13: Turn on the component and start playback, Turn mastervolume -/+ to adjust the volume, To mute the sound, To use the headphones, Automatic tuning, Press fm or am to select the fm or am band, Press tuning + or tuning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Amplifier Operation

Selecting the component

1

Press input buttons to select the input.

Listening to FM/AM radio

To select the

Press

VCR

VIDEO

DVD player

DVD

Built-in tuner (FM/AM) FM or AM

2

3

The selected input appears in the display.

Turn on the component and start

playback.

Note

If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.

Turn MASTERVOLUME -/+ to adjust
the volume.

Note

To avoid damaging your speakers, make sure that

you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.
The muting function will be canceled when you
do the following.

• Press MUTING on the remote again.

• Turn the power off.
• Increase the volume.

To use the headphones

Connect the headphones to the PHONESjack.

When the headphones are connected, speaker

output is automatically canceled and “SP” does

not light up in the display.

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM

antennas to the receiver (see page 7).

Tip

The tuning scale differs depending on the area code as
shown in the following table. For details on area codes,
see page 3.

Area code

FM

AM

U

100 kHz

10kHz*

SP

50 kHz

9 kHz

MX

50 kHz

10 kHz

E51

50 kHz

9 kHz*

* The AM tuning scale can be changed (see page 33).

Automatic tuning

If you do not know the frequency of the station

you want, you can let the receiver scan all

available stations in your area.

1

2

Press FM or AM to select the FM or AM
band.

The last received station is tuned in.

Press TUNING + or TUNING -.

Press TUNING + to scan from low to high;

press TUNING - to scan from high to low.

The receiver stops scanning whenever a

station is received.

Tip

If “STEREO” flashes in the display and the FM stereo

reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the

stereo effect, but the sound will be less distorted. To

return to stereo mode, press FM MODE again.

>

3

■o

o

■o

<D
fi>

5'

continued m

Advertising