Sony HT-DDW660 - Manual (Page 33)

Inputs (Digital)
DVD (Coaxial) Sensitivity: -
Impedance: 75 ohms
VIDEO (Optical) Sensitivity: -
Impedance: -
Reproduction frequency range:
28 - 20,000 Hz
Tone
Gain levels ±6 dB, 1 dB step
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate Frequency
AM tuner section
Tuning range
Models of area code U
With 10-kHz tuning scale:
With 9-kHz tuning scale:
Models of area code E51
With 10-kHz tuning scale:
With 9-kHz tuning scale:
Models of area code SP
With 9-kHz tuning scale:
Models of area code MX
With 10-kHz tuning scale:
Antenna
Intermediate Frequency
3) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press 1/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Power consumption (during standby mode)
0.3W
Dimensions (w/h/d) (Approx.)
4 3 0 x 145 x 301.5 mm
(17 X 5 6/8 X 11 7/8 inches)
including projecting parts
and controls
Mass(Approx.) 6.5kg(14lb6oz)
Speaker section
Front speakers (SS-MSP66L/SS-MSP66R)
Center speaker (SS-CNP66)
Surround speakers (SS-MSP66SL/
87.5 - 108.0 MHz
SS-MSP66SR)
FM wire antenna Front/center speakers Full range, magnetically
75 ohms, unbalanced shielded
10.7 MHz Surround speakers Full range
Speaker units 80 mm cone type
Enclosure type Bass reflex
Rated Impedance 6 ohms
Dimension (w/h/d) (Approx.)
530- 1,710kHz 3)
531 - 1,710kHz 3)
120 X 122 X 100 mm
(4 6/8 X4 7/8 X 4 inches)
Mass (Approx.)
530- 1,610kHz 3)
Front/center speakers 0.8kg(1 lb 13 oz)
531 - 1,602kHz 3)
Surround speakers 0.6 kg (1 lb 6 oz)
Sub woofer (SS-WMSP66)
531 - 1,602 kHz Speaker system Magnetically shielded
Speaker unit 200 mm cone type
530- 1,610 kHz Enclosure type Acoustically loaded bass
Loop antenna reflex
450 kHz Dimension (w/h/d) (Approx.)
>
Q.
Q.
5'
3
&>
3
&>
Mass (Approx.)
270 x 325 x 333mm
(10 6/8 x 12 7/8 x 13 1/8
inches) including front
panel
6.0 kg(13 lb4oz)
General
Power requirements
Area code Power requirements
U, MX 120VAC, 60 Hz
SP 220 - 230 V AC, 50/60 Hz
E51 120/220/240 V AC, 50/60 Hz
Power consumption
Area code Power consumption
U 150W
SP,E51,MX 150W
continued •
33 GB