Required cords, Q optical digital cord, Getting started – Sony HT-DDW660 User Manual
Page 5: Connecting your components, Sjtbbi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
1: Connecting your components
Required cords
The hookup diagram on page 6 assume the use of the following optional eonneetion eords (0 to B)
<D
(fi
C/)
a>
3.
(D
Q.
(not supplied unless indieated).
A
Audio cord
White (L)
Q Optical digital cord
Red (R)
B Coaxial digital cord (supplied)
sjTBbi
c
=CB
e
=
i
=
Orange
Notes
• Turn off the power to all eomponents before making any eonneetions.
• Be sure to make eonneetions firmly to avoid hum and noise.
• When eonneeting an audio eord, be sure to mateh the eolor-eoded pins to the appropriatejaeks on the eomponents:
white (le^, audio) to white; and red (right, audio) to red.
• When eonneeting optieal digital eords, insert the eord plugs straight in until they eliek into plaee.
• Do not bend or tie optieal digital eords.
continued m
^GB