Sears 36725 - Manual (Page 19)

REMOVABLE C00ICT0P BURNER COMPONENTS
Be sure that all controls are turned off and that the unit
is cool.
To remove!
Lift off burner grate, burner top and trim ring. Do not
remove burner bowl.
See the Cleaning Tips Chart In this manual. Be sure to
dry burner tops completely before re-assembling burner.
A
The electrode of the spark igailer is
exposed beyond the top of the
burner. When cleaning the burner
bowl, be careful not to snag the
electrode of the spark igniter with
your cleaning cloth. Pasvtage to the
igniter could occur. Be careful not
to turn on any cooktop controls while
cleaning
burner bowls. A slight
electrical shock might result, which
could cause you to knock over hot
cookware.
To replaces
1. Place the trim ring on the burner body.
2. Position the burner top on the burner body. To correctly
seat the burner top, examine the four notches on the
underside of the burner top. One of them is shaped
dlfferentlythantheotherthree. Hincludesan indexing key
for the spark Igniter. Tf® notch with the indexing key
fits over the spark Igniterwhen positioning burnertop.
3. Place burner grate over burner assembly and into
burner bowl. The bottoms of the four larger burner
grate fingers fit into fourcorresponding indentations
in the burner bowl.
BURNER
rS D ATC
laHA III
SPARK
IGNITER
BURNER I
BODY,
BURNER
TOP
TRIM
RING
BURNER
BOWL
REMOVABLE STORAGE ©RAWER
This drawer gives you space for keeping cookware and
bakeware. Plastics and flammable material should not
be kept In this drawer.
Do not overload the storage drawer. If the drawer Is too
heavy, it may slip off the track when opened. To open
the drawer, grasp the center of the handle and pull
straight out.
To removes pull drawer straight out and lift over the
guide stops.
To replace: lift over the guide stops and slide drawer
into place.
18
NGMNT22