Sears 85951 - Manual (Page 26)

MULTI-STAGE COOKING (Cont’d)
Second Stage (3 minutes:
power level 70)
6
.
Touch PAUSE. The light
below COOK 2 will go on.
The display window will show
“O”.
7. Touch TIME.
8 . Set 3 minutes by touching
"3”. “0" and "0”. “300" will
show in the display window.
9. Touch POWER CONTROL
and numbers “7” and “0”,
“70" will show in the display
window.
The second stage has been
set.
Third Stage (2 minutes;
power level 70)
10. Touch PAUSE. The light
below COOK 3 will go on.
The display window will show
“
0
" .
11. Touch TIME.
12. Set 2 minutes by touching
“2”, “0” a n d “ 0".
“200” will show in the display
window.
13. Touch POWER CONTROL
and numbers “7” and “0”.
“70” will show in the display
window.
The third stage has been set.
Fourth Stage (5 minutes;
power level 0)
14. Touch MEMORY/RECALL.
The light below COOK 4 will
go on.
The display window will show
“
0
”.
15. Touch TIME.
16. Set 5 minutes by touching
“5", “0” and “0”.
"500” will show in the display
window.
-K«nrr»orti-
1 ^ i,- as li i
•B b_ •t
MV
11 iL_2 It 3 I
dumm
1 > j[ Bg * ag > 1
as n="ll 1
17. Touch POWER CONTROL
and number "0".
“0" will show in the display
window.
The fourth stage has been set.
18. Touch START. The first
stage will begin cooking.
“lOOO“ will show in the display
window. The oven will begin
to cook at a power level 70
and the time will begin to
count down in the display
window.
When the 10
minutes are over, a tone -vil!
sound and the oven will stop.
“PAUS” will flash in the
display window.
After the pause, to restart the
oven, touch START for se­
cond cooking stage. “300” will
show in the display window.
The oven will begin to cook at
“70” power level. When the 3
minutes are over, a tone will
sound and the oven will stop.
“PAUS” will flash in the
display window.
After the pause, to restart the oven, touch START for
third cooking stage. “200" will show in the display win­
dow, The oven will begin to cook at "70” power level.
When 2 minutes are over, a tone will sound and the oven
will change itself into the fourth stage. “500” will show
the display window.
When 5 minutes as “Standing time" are over, a tone will
sound and the word “End” will show in the display windou-
for 2 seconds.
The oven would have finished four stages.
■"Standing time” allows the food to finish cooking and the
heat to be uniform throughout. See the cookbook for
detailed explanation.
NOTE: If you want to keep the food warm after finishing
the cooking cycle, you can use “Hold Warm: feature. For
detailed instructions on using “Hold Warm” feature, See
page 12 .
26