Sears OVERLOCK 385. 564180 - Manual (Page 12)

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Lower
looper
thread
guide (1
© ®
Lower
looper thread
tension dial
@ Insert the thread between tension
discs from the right. Then pull
both sides of the thread firmly
between tension discs.
(|) Pass the thread through lower
looper thread guide 11).
Thread'
Lower
looper
ihread
guide (4
/
■
Lower looper Looper ihread
® (?) ® guide ¡3) take-up lever
V......- -- . - - ............... - ......
(6) Pass the thread through the thread guide (2).
© Pass the ihread through the looper thread
take-up lever flower).
(a) Pass the thread through the thread guides
(3) and (4).
Make sure that the thread is between
the tension discs.
Tension discs
Pull the threader to pass the
thread through the hole of
lower looper thread guide {5).
Remove the thread from the
threader, and draw the thread
through the hole on lower
looper 10 cm (4") or more
with a pair of tweezers.
How to Thread Woolly Nylon/Polyester Thread
Turn the hand wheel toward
you until the lower looper
comes to the left, pass the
threader through hole on lower
looper thread guide (5).
Hook the end of thread on the
threader.
* To pass the woolly nylon/polyester thread shown above is one of the
easiest ways to do so.
* Use the same method for the upper looper.
11