Removing the presser foot, Attaching the presser foot – Sears OVERLOCK 385. 564180 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing the Presser Foot
SECTION_3. LEARN THE STITCHES_
Attaching the Presser Foot
(5) Press the lever located on the back ot foot
holder. The presser foot will drop off.
Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
Lower the foot holder and push the lever to lock
the foot in place. Raise the presser foot lifter to
check that the presser foot is secure.
27
Advertising