Sears OVERLOCK 385. 564180 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE YOUR MACHINE FOR-SEWING :
(T) Insert the thread between tension discs from
the right. Then pull both sides ot thread.
@ Pass the thread through upper looper thread
guide (1).
@ Pass the thread through upper looper thread
guide (2).
(
t
) Pass the thread through the looper thread take-
up lever (upper).
guide.
(i) Pass the threader through the hole on the upper
looper. Then hook the end ot thread on the
threader. Pull out the threader to pass the
thread through the hole. Remove the thread
from threader, and draw the free end of thread
10 cm (4"t or more.
13
Advertising