Sears 113242502 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUGNIMG RIP FENCE
The fence should slide easily along the bars and always
remain in alignment (parallel to sawbiade and miter gauge
grooves).
The alignment is maintained by a spring underneath the
fence which bears against the front guide bar,
To move the fertce, loosen the lock handle and grasp the
fence with one hand at the front,
For very ciose adjustments, grasp the guide bar with both
hands and move the fence with your thumbs..
Place fence on saw but DO NOT LOCK IT.
Move the REAR END of the fence siightty to the right or
left ., when you release it, the fence should "spring"
back to its original position.
If it does not, the spring pressure must be INCREASED.
1.
Loosen the screws
2. Move Spring slightly toward front of fence.
11