Ploughing and folding – Sears 113242502 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Feed the workpiece by hand along the AUXILIARY
FENCE/WORK SUPPORT
UiitsI
the end
is
approx.
1
in, past
the front edge of the table, Continue to feed using the
PUSH BLOCK.
Hold the workpiece in position and instai! the PUSH
BLOCK by sliding it on top of the AUXILIARY
FEfMCE/WORK SUPPORT {This May Raise Guard)
iSiarrow strips
Support may
thicker than the Auxiliary FenceAWork
enter the guard and strike the baffle,.
CAREFULLY raise guard only enough to
workpiece. Use PUSH BLOCK to complete cut.
clear
PLOUGHING AND FOLDING
PLOUGHING is grooving with the grain the long way of the
workpiece, using the fence, USE proper holddowns and
feed devices.
MOLDING is shaping the workpiece with the grain the long
way of the workpiece, using the fence. Use proper