Sears 831.23953.0 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. Orient the Front Console Cover (32) as shown.
Attach the Rear Console Cover (81) around
the Upright (2) by pressing the hooks on the
Rear Console Cover into the tabs on the Front
Console Cover (32).
Attach the Front Console Cover (32) to the
Upright (2) with two M4 x 16mm Screws (92).
10. Identify the Right Upper Body Arm (9), which is
marked with an “R” sticker.
Crient the Right Upper Body Arm (9) and an
Upper Body Leg (6) as shown. Insert the Right
Upper Body Arm into the Upper Body Leg.
Attach the Right Upper Body Arm (9) to the
Upper Body Leg (6) with two M8 x 45mm Button
Bolts (76) and two M8 Jam Nuts (77). Make sure
that the Jam Nuts are inside the hexagonai
hoies. Do not fuiiy tighten the Button Boits
yet.
Assemble the Left Upper Body Arm (8) and
the other Upper Body Leg (6) in the same
way.
10