Sears 831.23953.0 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

13. Identify a Pivot Cover A (19), which has hooks,

and a Pivot Cover B (22), which has tabs.

Attach a Pivot Cover A (19) and a Pivot Cover

B (22) around the Right Upper Body Arm (9) by
pressing the hooks on the Pivot Cover A onto the

tabs on the Pivot Cover B.

Repeat this step on the other side of the

eiiipticai.

Tip: Make sure that the Pivot Covers (19, 22)
are positioned as shown.

14. Orient the Rear Upright Cover (3) as shown.

Attach the Rear Upright Cover (3) to the Upright

(2) with three M4 x 16mm Screws (92).

Advertising