Sears 831.23953.0 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11. Using a small plastic bag to keep your fingers
clean, apply a generous amount of the included
grease to the axle on the right side of the
Upright (2).
Slide the Right Upper Body Arm (9) onto the
Upright (2).
Attach the Right Upper Body Arm (9) with an M8
X
20mm Screw (80) and an M8 Washer (33).
Repeat this step on the other side of the
eiiipticai.
12. Apply a small amount of grease to a Bolt Set
(31).
Hold the end of the Right Pedal Arm (49) inside
the bracket on the right Upper Body Leg (6).
Attach the right Upper Body Leg (6) to the Right
Pedal Arm (49) with the Bolt Set (31).
Repeat this step on the other side of the
eiiipticai.
Tighten the M8 x 45mm Button Bolts (76).