Nortel Networks NN42030-102 - Manual (Page 11)

— Call-me-First: In this mode, your calls are set up in two stages.
First, the system calls you. After you answer, the system calls the
other party.
— Direct: In this mode, you can initiate calls directly from your Nokia
device to other parties.
For more information, see “Call modes” on page 50.
Note: You must configure your Outgoing Call Service DN in the
MCC 3100 settings before you can use the Direct call mode. Your
system administrator provides the Outgoing Call Service DN to allow
direct MCC 3100 calling from your Nokia device.
Outbound Call From: you can start a call on your mobile device and
then switch over and speak to the person from another device.
Inbound Call modes:
— Screen Pop: In this mode, you receive a screen pop-up pane with
the far end caller identification and the choice to accept or reject
the call. The cellular call automatically answers on your mobile
device.
— Auto Accept: In this mode, the call automatically forwards to your
cellular device and you manually accept the incoming call. The
far end caller identification may only be presented if your Private
Branch Exchange (PPBX) supports number substitution and
number substitution is permitted in your region.
— Do Not Disturb: In this mode, all incoming calls route to your
Enterprise voice mail.
Available telephony features:
— call hold and retrieve
— call transfer—supervised and unsupervised
— call swap
— three-way conference call
— speaker mode.
Note: If you are connected to a 3G network, you can exchange
instant messages and track presence while you are engaged in a
voice call.
Nortel Mobile Communication Client 3100 for Nokia User Guide