Nortel Networks NN42030-102 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Software installation
“Upgrading the MCC 3100 for Nokia software over the air” on
“Moving the MCC 3100 for Nokia icon to the menu screen” on
“Uninstalling the MCC 3100 for Nokia software” on page 26
“Installing security certificates” on page 26
Installing the MCC 3100 for Nokia software
from a computer
You can use your desktop PC or laptop to install the MCC 3100 software.
After downloading the latest software load, you install it on your Nokia
device using a USB connection.
Before installation, install the Nokia PC Suite on your computer and
configure the device with the correct date and time.
The following procedure details the steps required to install the
MCC 3100 for Nokia software from a computer.
A zipped file contains the MCC 3100 for Nokia software and
documentation. Extract the contents of this file to a folder on your
computer before you install the software.
Installing the MCC 3100 for Nokia software (new install) from a
computer
1. On your computer, open a web browser and enter the HTTPS or
Hypertext Transfer Protocol (HTTP) address of the User Portal:
address or hostname>:8282/adminserver/userportal.html
address or hostname>:8553/adminserver/userportal.html
Note: Ask your system administrator for the correct hostname and
port settings.
2. Use the controls to locate the software file you require for your
device, and click Download.
3. Click Save.
NN42030-102 MC 3100 3.1 Standard 04.03
November 2009
20