Nortel Networks NN43110-101 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the components
3.
4.
5.
Install the handset. Plug the end of the handset cord with the short
straight section into the handset. Plug the end of the handset cord
with the long straight section into the handset jack on the back of the
phone (see Figure 5) marked with the symbol . Form a small bend
in the cord, and then thread it through the channel in the stand base
marked with the symbol so that it exits in the handset cord channel
on the right-hand side of the stand base (see Figure 4).
Install the LAN Ethernet cable. Plug one end of the supplied LAN
Ethernet cable into the LAN ethernet port on the back of your phone
(see Figure 5) marked with the symbol and thread the cable
through the channel in the stand base marked with the symbol .
Connect the other end of the cable to your LAN Ethernet connection.
Install the PC Ethernet cable (optional). If you are connecting your
PC Ethernet through the phone, plug one end of the PC Ethernet
cable (not supplied) into the PC ethernet port on the back of your
phone (see Figure 5) marked with the symbol and thread the cable
through the channel in the stand base marked with the symbol . Plug
the other end of the cable into the LAN port on the back of your PC.