SINGER W8418 - Manual (Page 5)

*JUneadi4Uf. the BaLLin Qaim
Before threading the bobbin case, study Fg. 6, 7
& 8 to get a general idea as to how it is done.
1. Hold the bobbin case with your left hand and put
the bobbin into the bobbin case with your right, leav-
. ing about two inches of the thread end unwound
: Fig. 6). As the bobbin is being inserted in the
bobbin case, the thread flow, you will note, in clockise
(Fig. 6).
2. While holding the bobbin case as before, grasp the
thread end with the right hand, guide it into the
cross slot (Fig. 7).
3. Then pull it throught under the tension spring of
the bobbin case (Fig. 7) until it enters the delivery
eye (Fig. 8).
Fig. 5
Fig. 7