During self-cleaning, After self-cleaning, To set oven for a self-clean cycle – Maytag CWE5800 User Manual

Page 10: To cancel clean cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

During Self-Cleaning

when the SELF CLEAN pad is pressed and the

door is locked, the oven will automatically begin
to heat to cleaning temperatures.

As the oven reaches cleaning temperatures, the

LOCK indicator will turn on to show that an

internal lock mechanism has engaged. At this
point, the oven door can not be unlocked and
opened.

To prevent damage to the door and lock lever, do
not force the door open when the LOCK
indicator is displayed.

The first few times the oven is cleaned, some

smoke and odor may be detected. This is normal
and will reduce or disappear with use. If the oven
is heavily soiled, or if the broiler pan is left in the
oven, smoke and odor may occur.

As the oven heats and cools, you may hear sounds
of metal parts expanding and contracting. This is
normal and will not damage your apphance.

After Self-Cleaning

About one hour after the end of the clean cycle,
the internal lock will disengage and the LOCK
indicator will turn off. At this point, the door can
be unlocked and opened. Move the door lock
lever to the left or unlocked position and open
the door.

Some soil may leave a hght gray, powdery ash

which can be removed with a damp cloth. If soil

remains, it indicates that the clean cycle was not
long enough. The soil will be removed during the
next clean cycle.

If the oven racks do not shde smoothly after a
clean cycle, wipe racks and embossed rack
supports with a small amount of vegetable oil to
restore ease of movement.

Fine, hair-hke hnes may appear in the oven
interior or oven door. This is a normal condition
resulting from heating and cooling of the
porcelain finish. These Hnes do not affect the
performance of the oven.

To set oven for a self-clean cycle:

1. Remove oven racks and close the oven door.

2. Move the door lock lever to the right or locked

position.

3. Press the SELF CLEAN pad.

• 3 HR:00 will appear in the display and SET

CLEAN TIME will flash in the display.
After a few seconds delay, the oven will
automatically turn on. CLEAN and ON will
appear in the display.

• If you wish to change the cleaning time,

press the SELF CLEAN pad and press the

A or T pad to select 2 hours for light soil or
4 hours for heavy soil.

• “door” will appear in the display and

continuous beeps will sound if the oven
door is not locked.

• If the door is not locked or the clean time is

not entered within 30 seconds of pressing
the SELF CLEAN pad, the program will
automatically be cancelled.

4. Press CLOCK pad and the current time of day

will reappear in the display. CLEAN and ON
will remain in the display to show that the

oven is in a clean cycle.

About one hour after the clean cycle ends, the

LOCK indicator will turn off and the oven door
can be opened.

The oven door and door lock lever will be
damaged if the oven door is forced to open when
the LOCK indicator is still displayed.

To cancel clean cycle:

1. Push CANCEL pad.

2. If the LOCK indicator is displayed, allow oven

to cool up to one hour. Once LOCK indicator
turns off, the door can be unlocked and
opened.

If the LOCK indicator is not displayed the
oven door can be unlocked and opened.

PAGES

Advertising