SINGER 147-28 - Manual (Page 17)

30 NUMERICAL LIST OF PARTS
No.
r.-lLoO
I 4309
34315
54336
54337
54328
54329
54331
54334
54343
54344
54348
5.1349
543G9
54377
54378
54387
34388
54389
54390
3.4391
54392
54393
54394
54395
54396
54397
54398
Platt;
2.066;t
20647
2064.8
20673
20671
20646
20646
20646
20648
20671
20674
20674
20669
20673
20673
20673
20671
20674
20671
20671
20671
Name
Thread (under) Tahe-up with 4652....................................
" " " Stripper................................
" (upper) Controller Wire............................................
Cloth Plato Oil Tube with 49092, for
54393 and 131845.....................................................
Feed (front) Rock Shaft Crank (back)
Slide Block (two pieces)............................................
Needle Bar Connecting Link for 5432.9....
" " " " Hinge Stud for
5‘U329.......................................................................
Needle Bar Connecting Stud with 211F and
two 18712, for ;>4329...............................................
Needle Bar Connecting Link 54326 with
54327 and 54328.......................................................
Thread (upper) Controller...................................................
Lcoper Carrier Pitman 54270 with 67;X2
and ,‘)0016C..............................................................
hooper Cari’ler C'onnectlon 54266 with
54263, for 5>.1344....................................................
hooper Carrier Ceinntotlon 54343 with
o4263) an.d 5426 c....................................................
hooper Driving Crank 54273 with 42C'74
and 42078...................................................................
hooper Boll Crank 5.1264 with 42078...............................
Feed (front) Rock Shaft Collar with two
461)0..........................................................................
hooper with 590J and 38393, for 54370...
" 54377 with 229D ana 46204 .............................
Arm Rotary Shaft for 54433...............................................
Cloth Plate for 54393 and 131B41;....................................
" ” Slide (left) for 54390.....................................
Cloth Plate Slide (left) complete for
54393 and 13 1 845, Nos. 384 19, r.4389
and tvjo 725J..............................................................
Cloth Plate Slide (right) for 1)4392....................................
Cloth Plate Slide (right) complete for
Throat Plate 131092, for 1/8 In. to
1/4 In. gauges, for 54393, Nos.
38419, 51391 and two 725J.......................................
Cloth Plate complete for Throat Plate
131092, for 1/0 In. to 1/4 In.
gauges, Hcs. 54309, 54308, 54390 and
54392.........................................................................
Feed (back) Bar Hinge Pin.................................................
" " Dog, 13 teeth (14 teeth to
the Inch) for 1/0 In. to 1/4 In.
gauges, for 131092....................................................
Feed (front) Bar...................................................................
" " " Connecting Link..............................
" “ " Connection with two
4S4C, for 131465.......................................................
NUMERICAL LIST OF PARTS 31
No.
54399
54400
54401
54402
54403
54404
54405
54406
54407
54408
54410
54411
54412
54413
54433
54450
54477
54988
56003
56006
56864
56865
57234
57235
57257
57258
58039
59456
59537
Plate
20671
20674
20669
20671
20671
20671
20671
20671
20671
20676
20676
20676
20676
20676
20669
20657
20648
20641
20641
20677
20677
20671
20671
20646
20646
20669
20648
20647
Name
Feed (front) Bar Hinge Pin..................................................
" ' Dog,9 teeth (14 teeth to
the Inch) for 1/8 In. to 1/4 In.
gauges, for 54413 and 131092...................................
Feed (front) Lifting Eccentric with two
4480, for 54433..........................................................
Feed (front) Regulator with 129D, for
131465........................................................................
Feed (front) Regulator Pitman.............................................
" " Rock Shaft...............................................
" ' 0 « Crank (back)
forked, with 50083C, 50200C and
50571D.......................................................................
Feed (front) Rock Shaft Crank (front)
with two 896E.............................................................
Feed Connecting Rod Hinge Pin Collar
with 457C....................................................................
Presser Foot Compensating Plate for
54412..........................................................................
Presser Foot Plate for 54412................................................
" “ Shank with 460C and 50429C,
for 54412, 68067 and 120586....................................
Presser Foot (compensating, hinged) com­
plete, Nos. 26276,54408,54410,54111
and two each 1449F and 24701..................................
Throat Plate, for 1/8 In. to 1/4 In.
gauges, for 54400, 68159, 68364 and
131845........................................................................
Arm Rotary Shaft 54387 with 54113,54401,
54450, 64351, 64355 and 131346..............................
Arm Rotary Shaft Collar with two 1258C,
for 54433....................................................................
Machine Base Screw Stud for 131461 and
131462........................................................................
Tension (upper thread) Releasing Pin....
Arm Oil Tube with 52045, for oiling
Needle Bar Connecting Link......................................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing.
Chain Hook (large) for 6439 and 37563...
" " (small) for 6439 and 37563...
Feed Rocking Frame Hinge Pin...........................................
* * • • « Bushing_______
Presser Bar Lifter.................................................................
" " * Hinge Stud....................................
Алл Rotary Shaft Flanged Bushing Oil Pad,
long (braided cotton) for 54090.................................
Thread (upper) Nipper Disc (outside) Nut
Washer for 68137.......................................................
Tension (under thread) Spring Bushing
(large).........................................................................